Skip to content
Plumbing

Hydro Jetting in Brigham City, UT

Hydro jetting for Brigham City homes: high-pressure water scours grease, scale and debris out of drain and sewer lines.

Do your Brigham City drains keep clogging after they have been snaked?

If a Brigham City drain keeps clogging after snaking, hydro jetting is usually the fix: high-pressure water scours grease, scale and debris off the pipe walls. A drain snake, also called an auger, bores a hole through a clog. A jetting nozzle does more. It sprays water forward to break up the blockage and backward to scrub the pipe clean from wall to wall. That makes it the right tool for kitchen lines, main drains and sewer lines that a snake only opens partway. Brigham City is our home base. We bring the same tools here that we use across Northern Utah: drain snakes, hydro jetting equipment and sewer cameras.

Warning signs your drains need hydro jetting

The same clog keeps coming back

Does a kitchen sink or main drain need snaking every few months? Then the snake is only opening a channel through buildup that lines the pipe. Jetting removes the buildup itself.

Several fixtures drain slowly at once

One slow sink is a local clog. A slow tub, sink and toilet together point to a problem farther down, in the main drain or the sewer line.

Gurgling sounds and sewer smells

Gurgling when the washer empties or a toilet flushes means air is being forced around a partial blockage. A sewer smell from a floor drain can mean waste is sitting in the line.

Water rising in a basement floor drain

Water coming up through the lowest drain in the house means the main line is badly restricted. Stop running water and give us a call.

Common causes of stubborn clogs in Brigham City homes

Hard-water scale

Brigham City's water is hard and full of minerals. Over the years it leaves scale inside pipes, the same chalky crust you see on faucets and showerheads. Scale narrows the pipe and gives grease and debris something to grab onto.

Kitchen grease and food waste

Cooking grease goes down warm and cools into a sticky layer along the pipe. Food scraps, coffee grounds and soap cling to it until the line closes up.

Tree roots in older sewer lines

In older homes, fine roots can work into sewer line joints and catch everything that flows past. Jetting clears fine roots and the debris they hold. The camera tells us whether the pipe itself is damaged.

Wipes and paper products

Wipes sold as flushable, paper towels and hygiene products do not break down like toilet paper. They snag on scale or roots and build a dam in the main line.

What to expect when we jet your drain

We start by asking what you have noticed and which drains are slow. For main drains and sewer lines, we run a sewer camera through the pipe first. It shows what is causing the clog, where it is, and whether the pipe is sound enough for jetting. We show you what the camera sees, too.

Then we explain your options and give you the price before any work starts. If the line is in good shape, we jet it from the cleanout, the capped access pipe on your drain line. We work the nozzle through until the walls are clear, then run water to confirm it drains freely. Sometimes the camera shows a cracked, sagging or collapsed pipe. Jetting will not solve that, so we will walk you through sewer line repair options.

Hydro jetting in Brigham City

Brigham City has older homes in established neighborhoods alongside newer subdivisions, and their drains clog for different reasons. Older homes may still have cast iron or clay sewer pipe, where scale and roots build up. Newer homes usually have plastic lines, where grease and wipes cause most clogs. Our cold winters and freeze-thaw cycles are one more reason not to let a slow main line wait. A backup is harder to deal with when the ground is frozen. Learn more about our work in town on our Brigham City service area page.

Related services in Brigham City

Our hydro jetting page explains the service in more depth for all of Northern Utah. If scale keeps coming back, water softener installation in Brigham City treats hard water before it reaches your pipes. For a basement that takes on water, see sump pumps in Brigham City. For a clog a snake can handle, start with drain cleaning.

Schedule hydro jetting in Brigham City

Call (435) 730-2536 Monday to Friday, 8 AM to 6 PM, or schedule online. Tell us which drains are slow and how long it has been going on. We will plan the visit around it.

Frequently asked questions

Is hydro jetting safe for my pipes?+
For pipes in sound condition, yes. That is why we run a camera through main drains and sewer lines first; if a pipe is cracked or collapsed, we recommend repair instead of jetting.
What is the difference between snaking a drain and hydro jetting?+
A snake bores a hole through a clog so water can flow again. Hydro jetting uses high-pressure water to scrub the buildup off the whole pipe wall, so there is less left behind to start the next clog.
Can hydro jetting clean my sewer line?+
Yes. Jetting clears grease, scale, fine roots and debris from the main sewer line that carries waste away from your home. We check the line with a camera before we start.
Do you do hydro jetting outside Brigham City?+
Yes. Brigham City is our home base, and we also offer hydro jetting in nearby towns such as Perry, Tremonton and Ogden, and across Northern Utah.

Need Hydro Jetting in Brigham City, UT?

Call Your Comfort Heating & Air or request service online. Free estimates on new system installations.